The 15' MacBook Pro replaces the 15' Aluminum with innovative features, such as an Intel processor, Magsafe power connector, and integrated iSight camera. Troubleshooting is fairly straightforward.
Note: This troubleshooting guide covers all original 15' MacBook Pros. The MacBook Pro 15' Unibody will be covered on a separate troubleshooting guide.
If there is protective film around the power adapter, remove it before setting up your MacBook Pro. M Insert the AC plug of your power adapter into an outlet and the power adapter plug into the MacBook Pro power adapter port. As you get close to the port, you will feel a magnet, which helps draw and guide the power adapter plug in. On the 2010-2012 and also 2009 mac pros, just unplug the mac pro and hold in the power button for like 3-5 seconds. See if that will bring life back to it. If its not that the likely culprit could be a faulty power supply and or power button module. Speaking of power supply, do you even hear anything coming out the back of the mac pro? The 15' MacBook Pro replaces the 15' Aluminum with innovative features, such as an Intel processor, Magsafe power connector, and integrated iSight camera. Troubleshooting is fairly straightforward. Note: This troubleshooting guide covers all original 15' MacBook Pros. The MacBook Pro 15' Unibody. Computers Troubleshooting power-up issues for Mac systems. If your Mac does not sound the boot chimes and load OS X when powered on, then there is likely a hardware fault at play.
MacBook Pro won't turn on
Your computer will not boot.
RAM issues
If your computer beeps three times, there is a RAM issue. Either you have insufficient RAM to boot, or the RAM you do have is faulty. First, access the RAM slots (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 and A1260)) and ensure you have RAM installed. If you have two chips, first reseat them and try again. If that doesn't work, try one chip at a time to see if one of the chips prevents the machine from booting. If none of these work, you may have a bad logic board.
Bad Left I/O Board
If your left I/O board is bad, you will not be able to start your computer when it's plugged into the wall. It may or may not run on battery and the light on the power adapter will not light up at all (some power adapters do not have lights, so this may not apply to your computer). These symptoms point to a left I/O board that needs to be replaced (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 and A1260)).
We carry replacement left I/O boards for the following models: Core Duo, Core 2 Duo (Model A1211), Core 2 Duo (Model A1226), and Core 2 Duo (Model A1260).
Bad power adapter
If your battery is not charged, is completely dead or is removed from your machine, please make sure you are NOT using a 60W MacBook Magsafe adapter! A MacBook Pro is shipped from the factory with a 85W adapter and needs the full 85W to boot. The 60W adapter will keep a charged battery from draining but does not have enough juice to provide full charging functionality. If your power adapter is bad, the computer will run off a battery, but it won't charge. If your battery's charge is too low, it will be difficult to diagnose a bad power adapter. The easiest way to test this is to borrow either a battery or power adapter to test in your machine. If you have the same problem with another power adapter, your problem is most likely the left I/O board. If you have the same problem with a fully charged battery, you most likely need a new logic board.
Thermal Sensor Issues
If the fans run at high RPMs, but the computer does not boot, there is probably an issue with the thermal sensors. First, ensure that the thermal sensors are plugged in. If they are, try replacing the thermal sensors. If this does not fix the problem, the logic board most likely needs to be replaced.
Bad logic board
If the above steps don't fix your problem, replace (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 and A1260)) the logic board. We offer logic boards for the following models: Core Duo, Core 2 Duo (Model A1211), Core 2 Duo (Model A1226), or Core 2 Duo (Model A1260).
Laptop shuts off when I unplug it
As soon as you unplug the computer from a power source, it shuts off
Dead battery
If your battery is dead, the computer will run fine off the power adapter, but will turn off when unplugged. A dead battery can manifest itself in many forms: It may not accept a charge (this particular symptom may also indicate a problem with the logic board), the computer may not recognize the battery, or the battery may be recognized as charged but fail to power your computer when the AC adapter is unplugged. We sell new replacement batteries.
Flashing question mark on startup
The computer displays the flashing question mark when it can't find a bootable operating system. This could be because your OS is corrupt, the computer doesn't have enough RAM, or your hard drive is failing.
Bad operating system
Try booting off an OS CD. Run Apple's Disk Utility and try to repair the disk. You could also try Alsoft's DiskWarrior. If this fails, reinstall your operating system. If you can, erase the hard drive prior to reinstalling the OS.
Not enough RAM
This is quite rare. If you have insufficient RAM for your computer to boot the operating system, you may get the flashing question mark. Installing (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 and A1260)) more RAM or downgrading to an older operating system will fix this. You need 128 MB RAM to run OS X 10.0-10.4, and OS X 10.5 requires 512 MB RAM.
Bad hard drive
The hard drive may have been erased, corrupted, or damaged. If the hard drive has been erased, format it as HFS+ and reinstall your operating system back onto it. If it is corrupted or damaged, you need to replace (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 and A1260)) it. Failing hard drives can display intermittent data corruption prior to failing completely. They often gradually get louder and start to click. If your hard drive is making abnormal clicking noises but still works, back up your data immediately and replace the hard drive. Any of our 9.5mm SATA hard drives will work in your computer.
My screen looks black, but I can see very faint graphics on it
Symptoms of this are a dark screen, but everything else seems to be running. If you get in close with a flashlight, you can usually see the image faintly.
Backlight
If your backlight isn't working, the inverter may be bad. Other parts that may be bad are the display or the logic board. If your backlight fails intermittently while moving the display, the problem is with the inverter cables. Otherwise it is impossible to test for damaged parts without replacing them one by one. If you are comfortable taking apart the display assembly, replace the display inverter first, then replace the LCD. If you are not comfortable with this, you can replace both parts at once by replacing (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 or A1260) the display assembly. We offer the following displays for sale: (Core Duo, Core 2 Duo (Model A1211), Core 2 Duo (Model A1226), or Core 2 Duo (Model A1260)). If this still doesn't solve your problem, you need a new logic board. However, you can generally rule out a problem with the logic board if you can plug in an external monitor and it works.
Other problems
Mac Pro 2010 Troubleshooting Power Up Issue Manual Download
Ports/Audio
If you lose firewire or ethernet, the only thing to blame is the logic board. Because there are many components of the logic board, many possible symptoms indicate logic board failure. Any one of these components can fail and leave the others intact. If you lose audio or USB on the left side of the machine, the left I/O board is to blame and must be replaced (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 and A1260)). Loss of USB on the right side requires the replacement of the logic board. If you lose the use of another component of your computer, such as the display, battery, or even power, and replacing the apparently non-working part didn't fix the problem, it is possible that the logic board may need to be replaced (Core Duo, Core 2 Duo (Model A1211), or Core 2 Duo (Models A1226 and A1260)).
Clues to the causes of Mac startup problems can be found by analyzing when in the boot process the system fails. Problems may be related to the power supply, battery, hard drive, logic board, OS corruption or an issue with a user account. Macs are reliable machines, but like many of us they get cranky from time to time.
Isolating where the problem is occurring is key to finding the solution. Unplug any external peripherals (disk drives, printer, etc.) to help narrow down the cause.
Optimize your Mac for the best performance possible
CleanMyMac can fix common problems that make your Mac run slowly. Whether you want to reindex Spotlight, repair disk permissions, speed up Mail’s search function or perform other crucial tasks, CleanMyMac makes it easy to boost Mac performance.
This post is sponsored by MacPaw, maker of CleanMyMac.
The following questions are helpful to narrow down the cause of your Mac’s lethargy:
Does the system turn on?
If your Mac won’t power on at all, likely suspects are a failed power supply, a bad logic board, a blown fuse (on desktops), a dead battery or a bad AC adapter (on portables).
Failed power supplies are sometimes accompanied by a popping sound. That’s usually a capacitor which has given up the ghost and burst open. iMac G5 systems frequently suffer from bad power supplies. Supplies can fail fully or partially – they may give some power to the fans and such but still not work properly. Fortunately a power supply or AC adapter is relatively inexpensive to replace.
Laptops have an additional power supply in the battery. A dead or defective battery can prevent your MacBook or PowerBook from booting, or the battery may keep your system running after a crash, unable to reboot. For laptops that have removable batteries (a dying Apple breed) remove the battery and unplug the computer when troubleshooting.
Macs also have another battery, called the PRAM (or NV-RAM) battery, that saves things like network settings, choice of startup drive, etc. If the date and time reset each time you unplug the Mac you need a new PRAM battery. A dead or dying PRAM battery can prevent a Mac from booting or cause erratic behavior. Sometimes plugging in the computer and letting it sit for 30-60 minutes recharges the battery enough to permit booting.
Does it make any noise?
Listening to your computer may seem a bit metaphysical, but can provide helpful clues to startup problems. If your Mac doesn’t make any noise at all when switching it on, or if you hear the fans running but nothing else, you may again have a power supply or logic board failure.
Sometimes a Mac will power on but the hard drive will squeal, whine very loudly or make ticking sounds. This can indicate a failed or failing hard drive. Sometimes switching on/off a few times can help, but don’t push things under these circumstances. Leaving a failing drive struggling too long can cause further damage
If you have a very old Mac with a non-spinning hard drive, more drastic measures may be required. Some people have had success freezing a drive to fix this problem, but I haven’t tried this method myself. If you have to resort to these types of tricks to get your disk working, copy any important data off a disk immediately when it’s accessible to be safe.
A groaning or buzzing sound that revs up and down at low RPM (and sounds like a wounded animal) could be a fan undergoing a slow death. These components are inexpensive to replace.
Mac startup tones and blinking lights
The Mac’s distinctive startup chime is more than an aural brand, it indicates a successful hardware (POST) test. If you don’t hear the chime but instead hear a single tone, a series of tones, or see blinking lights, your Mac is indicating a hardware problem. This may be the logic board, bad RAM, the power manager, a video card, etc..
Bad RAM can be a common culprit – on newer Macs, a blinking sequence of lights at startup can indicate this condition. Fortunately this is easy to test for: shut down the computer, remove one RAM DIMM at a time (remove in pairs on the Mac Pro or PowerMac G5), then reboot. Repeat for each DIMM in succession until you find the culprit. See your Mac Owner’s Manual (or Google for instructions) on to remove and install RAM.
If RAM isn’t the issue, check the Apple Knowledge Base for information. Unfortunately non-standard startup tones often require a trip to a Mac service center for further diagnosis. These tones are the “Check Engine” lights of the Macintosh world.
Once the screen turns grey the hardware tests are complete, and the Mac looks for a boot volume. Software now dominates the startup process.
Flashing question mark with folder, or circle/slash
The flashing question mark or a circle/slash means your Mac can’t find a valid startup disk. This can indicate a corrupt installation of Mac OS X or a failed (or failing) hard drive.
A pass through the excellent DiskWarrior utility is highly recommended for any disk-related startup problems. You can also try Apple Disk Utility or another third-party utility like TechTool Pro or Drive Genius to try to repair the disk. If the drive is OK after repairs but the Mac still won’t boot, do an Archive & Install of Mac OS X to replace the operating system.
When the Apple Logo appears your Mac has found a valid system disk, and Mac OS X begins loading.
Apple logo with spinning gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Mac blue screen or blank desktop
After the Operating System has finished loading the loginwindow process manager takes over and deposits you at your desktop. A hang at a blue screen, at the login window, or at the image of your blank desktop often indicates a Problem with a User Account. Corrupt Fonts or bad Preference Files (.plist) are common culprits.
Setting up a second, emergency admin account on your Mac is helpful for troubleshooting account problems. Safe Boot may help too, as that bypasses non-essential fonts and user startup items which you can then remove from your User Library folder
Kernel panic
“You need to restart your computer.” No ifs, ands, or buts. Presented in your native language, or something close.
A kernel panic is an Operating System crash with an historically colorful name. Mac crashes can take on all sorts of appearances – the Spinning Beach Ball being perhaps the most familiar – but Apple has succeeded in scaring the bejesus out of many users with this dialog. It is accompanied by the screen slowly darkening from top to bottom before a multilingual warning appears:
A kernel panic can happen at virtually any point in the boot process and may indicate a corrupt OS, an incompatible kernel extension, or a hardware problem. Try a Safe Boot to disable non-Apple extensions. If that doesn’t work try disconnecting peripherals, removing RAM, PCI cards, etc.. More good info about kernel panics can be found at The-X-Lab.
Boot Mac from another drive to troubleshoot
If your Mac has an optical drive (aka SuperDrive – most do) you can boot from an Apple software install CD or DVD – insert your disc, restart and hold down the C key. Once the installer begins you can run Disk Utility (from the Utilties menu) or perform an Archive & Install. Intel Macs can also boot from a USB flash drive which contains a bootable disk image, this can be very handy in an emergency.
You can also use a clone of your Mac hard drive to boot a cantankerous system. This not only allows you to check, fix or copy data off the primary boot drive but continue working immediately when you have disk problems. For more details see How (and Why) to Clone Your Mac Hard Drive.
More tips and suggestions?
I’m sure there are many other tips and suggestions on the topic of Mac startup problems; please let us know some of your ideas and experiences in the comments.
OLD COMMENTS ARE REPOSTED BELOW (LOST AFTER SWITCH TO DISQUS):
Adam Rosen – Submitted on 2010/09/02 at 1:08 am
Ian – glad the cheap fix worked!
Ian – glad the cheap fix worked!
Kacey – sounds like you have a bad hard drive. That’s usually about a couple hundred dollars (US) to replace, parts and labor.
—–
Ian – Submitted on 2010/08/31 at 3:05 pm
Adam,
Ian – Submitted on 2010/08/31 at 3:05 pm
Adam,
To follow up, just heard from the repair shop. The cable is bad. Logic board is fine. Thanks for your guidance.
—–
Adam Rosen – Submitted on 2010/08/30 at 12:40 pm | In reply to Ian.
Ian – I’ve seen similar problems with that SATA cable to the logic board on Apple laptops, so yes that’s a possibility. You also may have a hairline fracture on the logic board or loose connector on cable. Since you know the disk is good, worth replacing the HDD cable next (it’s cheap) and see if that works.
Adam Rosen – Submitted on 2010/08/30 at 12:40 pm | In reply to Ian.
Ian – I’ve seen similar problems with that SATA cable to the logic board on Apple laptops, so yes that’s a possibility. You also may have a hairline fracture on the logic board or loose connector on cable. Since you know the disk is good, worth replacing the HDD cable next (it’s cheap) and see if that works.
—–
Ian – Submitted on 2010/08/30 at 11:55 am
Adam,
Impeccable timing. I have a 14 mo old MBP 13″ (June 2009). No problems until Sunday morning. I’m running OS X 10.6 with all updates installed. I was able to log in and clicked on Mail icon. It froze. I did a force quit. Same thing happened when I launched Safari. I was in for about a minute and then it froze. Force quit wouldn’t work so I held down the power button. Trying to log back in, I couldn’t get past the Apple logo and spin gear.
Ian – Submitted on 2010/08/30 at 11:55 am
Adam,
Impeccable timing. I have a 14 mo old MBP 13″ (June 2009). No problems until Sunday morning. I’m running OS X 10.6 with all updates installed. I was able to log in and clicked on Mail icon. It froze. I did a force quit. Same thing happened when I launched Safari. I was in for about a minute and then it froze. Force quit wouldn’t work so I held down the power button. Trying to log back in, I couldn’t get past the Apple logo and spin gear.
I let the logo and spin gear go for about 3 hours and nothing. I tried safe mode and couldn’t get past this:
SATA WARNING: Enable auto-activate failed.
Stil waiting for root device (in perpetuity)
Stil waiting for root device (in perpetuity)
I tried booting from the install DVD and no luck either. Apple “genius” said the HDD was bad. Upon mounting a new drive (WD 500G 5400 rpm), it couldn’t find that drive either. Took it to a third party repair store and he was able to mount my old drive externally and I was able to get in. He said either the cable from the HDD to the logic board was bad or the logic board was bad. Does this sound accurate? If the logic board truly was bad, would I be able to do anything whether the drive was mounted interal or externally? Thanks.
—–
Kacey – Submitted on 2010/08/27 at 11:23 pm
The “Flashing Question Mark with Folder, or Circle/Slash” is what occurs when I attempt to turn my macbook on. It is a little over a year old and I do not have a valid warranty. This issue happened after I shut off the computer by holding the start button due to safari having a rainbow pinwheel for a few minutes. Why is this happening so randomly? What is actually wrong and how much do you think it will cost to fix?
Thanks so much
Kacey
Kacey – Submitted on 2010/08/27 at 11:23 pm
The “Flashing Question Mark with Folder, or Circle/Slash” is what occurs when I attempt to turn my macbook on. It is a little over a year old and I do not have a valid warranty. This issue happened after I shut off the computer by holding the start button due to safari having a rainbow pinwheel for a few minutes. Why is this happening so randomly? What is actually wrong and how much do you think it will cost to fix?
Thanks so much
Kacey
—–
Adam Rosen – Submitted on 2010/08/24 at 1:42 pm
Jill – you’re likely looking at a hardware problem, possibly bad motherboard. I suggest you take the laptop to an Apple Service Center.
Adam Rosen – Submitted on 2010/08/24 at 1:42 pm
Jill – you’re likely looking at a hardware problem, possibly bad motherboard. I suggest you take the laptop to an Apple Service Center.
—–
jill herlands – Submitted on 2010/08/24 at 11:45 am
My daughter’s laptop will not start .. at all! was fine last night, but this morning nothing … black screen, no sounds, no movement … the power plug is in and green … (this is less than a year old, and yes, we will use the warranty to replace, and my husband is a techie, but not home at the moment)
jill herlands – Submitted on 2010/08/24 at 11:45 am
My daughter’s laptop will not start .. at all! was fine last night, but this morning nothing … black screen, no sounds, no movement … the power plug is in and green … (this is less than a year old, and yes, we will use the warranty to replace, and my husband is a techie, but not home at the moment)
any advice for today so she can at least try to do something … your advice and/or thoughts would be most appreciated!
jill
—–
Adam Rosen – Submitted on 2010/08/16 at 9:19 am
Karen – it sounds like your user account is corrupt. You can use the Get Info window in the Finder to give yourself access to your files from another admin account, or boot the iMac in Target Disk Mode and access from a second system.
Adam Rosen – Submitted on 2010/08/16 at 9:19 am
Karen – it sounds like your user account is corrupt. You can use the Get Info window in the Finder to give yourself access to your files from another admin account, or boot the iMac in Target Disk Mode and access from a second system.
—–
Karen Brew – Submitted on 2010/08/16 at 5:59 am
Please can you help me out. We have an iMac7,1 with Intel Core 2 Duo and System Version: Mac OS X 10.4.11 (8S2167). When I try to log in it goes to the page with Finder in the menu bar and then 2 or 3 seconds later goes straight back to the login page whether or not I click with the mouse or try using the keyboard. We tried changing the password but it makes no difference. My daughter is the administrator so we can log in as her and use the computer but I am unable to access the documents I have under my log in.
Please can you advise how to correct this so I can log on or is there a way to access my documents through her account?
I am not that computer literate but have tried searching through the Apple help menus to no avail.
Kind Regards
Karen
Karen Brew – Submitted on 2010/08/16 at 5:59 am
Please can you help me out. We have an iMac7,1 with Intel Core 2 Duo and System Version: Mac OS X 10.4.11 (8S2167). When I try to log in it goes to the page with Finder in the menu bar and then 2 or 3 seconds later goes straight back to the login page whether or not I click with the mouse or try using the keyboard. We tried changing the password but it makes no difference. My daughter is the administrator so we can log in as her and use the computer but I am unable to access the documents I have under my log in.
Please can you advise how to correct this so I can log on or is there a way to access my documents through her account?
I am not that computer literate but have tried searching through the Apple help menus to no avail.
Kind Regards
Karen
—–
thedavidbeach – Submitted on 2010/07/25 at 7:48 pm
Perfect timing. Mac repair guy said… oh you saw the kernel panic before the problem? I wasnt aware of what it was called. Now I find out tomorrow how serious the issue I have to pay for is.
thedavidbeach – Submitted on 2010/07/25 at 7:48 pm
Perfect timing. Mac repair guy said… oh you saw the kernel panic before the problem? I wasnt aware of what it was called. Now I find out tomorrow how serious the issue I have to pay for is.
Im accepting donations via paypal ;-)
Very helpful article. Thanks!
—–
Adam Rosen – Submitted on 2010/07/25 at 7:06 pm
Tom – I’d bring the Mini to an Apple Service Center for evaluation.
Adam Rosen – Submitted on 2010/07/25 at 7:06 pm
Tom – I’d bring the Mini to an Apple Service Center for evaluation.
—–
Tom – Submitted on 2010/07/25 at 11:30 am
I tried to run off a USB drive without the Hard Drive or Super Drive attached. I still get a grey screen – no logo.
Tom – Submitted on 2010/07/25 at 11:30 am
I tried to run off a USB drive without the Hard Drive or Super Drive attached. I still get a grey screen – no logo.
—–
Greg – Submitted on 2010/07/24 at 1:15 pm
Just wanted to share an experience I went through with my first gen 20″ iMac G5 last year.
Greg – Submitted on 2010/07/24 at 1:15 pm
Just wanted to share an experience I went through with my first gen 20″ iMac G5 last year.
Mac Pro 2010 Troubleshooting Power Up Issue Manual Pdf
One day, it decided not to even give me the POST chime. I took it to the Apple ‘Genious” who promptly told me I needed a new logic board at a cost of $440. I said no thanks and went home. I have been an electronics tech for many years so I wasn’t going to let this go that easily.
Mac Pro 2010 Troubleshooting Power Up Issue Manual 2016
I built enough clone PC’s back in the day to see a shorted component load down the power supply and cause a seemingly unrelated component to appear dead. This time was no exception. I unplugged everything from the logic board except for the power supply and video connections and hit the power button. Sure enough, I got a chime. Began plugging things back in one at a time until I found the culprit. Turned out to be the hard drive temp sensor. A $24 part if ordered off the internet. No expensive logic board replacement, just a little temp sensor board.
Don’t always trust the ‘Genius” at the local Apple store. They won’t dive in deep to fix an issue and would rather sell you a new computer (that was their suggested fix vs. logic board replacement). I sometimes think back and wonder what excuse they would have come up with after a new logic board did nothing to fix the problem.
—–
David – Submitted on 2010/07/24 at 3:31 am
My PowerMac G4 MDD (2003) is eating internal batteries. After a week or two new battery is dead. Rather costly to replace battery 20-30 times a year. Otherwise this old wind tunnel is working perfectly.
David – Submitted on 2010/07/24 at 3:31 am
My PowerMac G4 MDD (2003) is eating internal batteries. After a week or two new battery is dead. Rather costly to replace battery 20-30 times a year. Otherwise this old wind tunnel is working perfectly.